- Stormwater Management
- Stormwater Attenuation
- Stormwater Dry Flow Channel Pipes
- Stormwater control
- Stormwater treatment
- Rainwater Management
- Domestic Rainwater Harvesting system
- Commercial Rainwater Harvesting systems
- Domestic/Commercial Grey-water recycling system
- Wastewater Management
- Sewer Cleansing
- Combined Sewer Overflows (CSO's)
- Pumping chambers
- Septic tanks
- Waste Management
- Flood protection
- Ground heat exchangers (Earth tubes)
- Stormwater Management
Spillway Outfalls and Headwalls
CPM Environmental have developed an Off-Site Solutions Spillway Headwall system so why spend days constructing an in-situ headwall on site when pre-cast options are available now & can be installed in hours, not days!
Benefits
- One-piece reinforced concrete
- CPM Spillway Headwalls can accommodate pipe-work up to & including 1600mm ID - 2000mm OD
- Can be pre-fitted closed coupled & cranked gratings
- Four sizes available each with various height options
- Bespoke pre-cast options available
- Can be pre-fitted various accessories including: Hydro-Brakes®, Penstocks, Non-return Flap Valves
- Can be installed at a fraction of the cost of in-situ unit.
- Greatly reduced installation time on site
- No or minimal on-site fabrications
