With an increase in urbanisation, Marshalls CPM has built up a product range to ensure they offer a full series of products for the commercial market, these include:
Related Products
-
Concrete Pipes
Marshalls CPM offer an extensive range of precast concrete flexible jointed pipes from 225mm to 1800mm to BS EN 1916:2002 Class 120.
View Concrete PipesConcrete Pipes Products
-
Traditional Manholes
Marshalls CPM offer a traditional tongue and groove range of precast concrete manholes that comply with BS EN 1917:2002/BS 5911-3:2010 from 900mm to 3000mm.
View Traditional ManholesTraditional Manholes Products
-
Sealed Manholes
Marshalls CPM has developed a range of sealed manhole systems.
View Sealed ManholesSealed Manholes Products
-
Gully Pots/Covers
Marshalls CPM gullies are typically used on roadways and are produced monolithically on fully automated machines.
View Gully Pots/Covers -
House Inspection Chamber
Marshalls CPM produce a range of precast concrete inspection chambers (HIC) in a variety of depths.
View House Inspection Chamber -
Box Culverts
Marshalls CPM's precast concrete box culverts are designed and manufactured in accordance with EN 14844 in both standard sizes available from stock and a bespoke range that is manufactured to customer specification.
View Box Culverts -
Retaining Wall Series
Marshalls CPM's Redi-Rock™ retaining wall series offers low project costs and a high quality solution.
View Retaining Wall Series -
Freestanding Wall Series
Besides looking great, these Redi-Rock™ freestanding walls serve as guardrails or barrier walls to protect areas from errant traffic or other threats...
View Freestanding Wall Series -
Reinforced Walls
This Redi-Rock™ system combines the massive stability with the natural appearance of stone with the established performance of geogrid reinforcement through a simple and highly efficient positive connection with the Redi-Rock™ reinforced block.
View Reinforced Walls -
L-Shape Retaining Walls
Manufactured in an assortment of sizes, Marshalls CPM's precast concrete L shape retaining walls are ideal for a variety of applications.
View L-Shape Retaining Walls -
Flood Protection
Marshalls CPM offers a range of flexible low cost, high quality solutions based on their innovative Redi-Rock™ interlocking modular wall system.
View Flood Protection -
Ground Heat Exchangers
Ground Heat Exchangers or Earth Tubes are used in the ventilation, heating and cooling of buildings.
View Ground Heat Exchangers -
Stormwater Control
Marshalls CPM has been at the forefront of innovation in the development of stormwater flow control chambers and has introduced a wide range of easy to install pre-formed flow control chambers.
View Stormwater ControlStormwater Control Products
- Flow Control Chambers
- Hydro-Brake Chambers
- Penstock Chambers
- Hydro-Brake Penstock Chambers
- Section Component Hydro-Brake Chambers
- Overflow Chambers
- Non-Return Flap Valve Chambers
- Sectional Wide Wall Flow Control Chambers
- One Piece Flow Control Chambers
- Weir Wall Chambers
- Complex Weir Wall Chambers
- Split Wall Chambers
- Spillway Outfall
- Headwalls
- SuDS
-
Attenuation
As the increasing impact of developments in urban areas compromises the natural flow patterns of the water cycle, leading to an increase in the volume and flow rate, together with detrimental impact on the quality of surface water runoff, storm attenuation products are being a necessity.
View AttenuationAttenuation Products
-
Pump & Wet Well Chambers
Marshalls CPM off site solutions team can manufacture a wide of pump and wet well chambers to suit the requirements of customers.
View Pump & Wet Well Chambers -
Combined Sewer Overflow (CSO)
To resolve the dilemma of excessive flow in sewers Marshalls CPM offer a range of bespoke combined sewer overflow (CSO) chambers which reduce the overcapacity at the treatment works.
View Combined Sewer Overflow (CSO) -
Combined Pump & Valve Chamber
A partnership between Marshalls CPM’s off-site solutions team and contractors, NMC Nomenca has developed a combined pump and valve chamber by utilising Marshalls CPM’s caisson shaft system.
View Combined Pump & Valve Chamber -
Bespoke Precast
From design to Eurocodes through to manufacture we concentrate on producing high quality structural and non-structural bespoke products, which provide best value for our clients.
View Bespoke Precast -
Flat Pack Systems
Marshalls CPM produces a bespoke range of flat pack chamber systems that can be used in situations where conventional circular chambers are not appropriate.
View Flat Pack Systems -
Special Cover Slabs
Marshalls CPM have manufactured extra large heavy duty cover slabs for airports and seaports as well as those designed to comply with the Highways Agency Specifications.
View Special Cover Slabs