An end entry manhole is used at the end of either an in-line or off-link tank, consisting of a standard pipe with a reinforced end wall, saddle slab pre-fitted onto the barrel complete with an access hole to suit and a 1200mm sealed manhole joint.
A 1200mm sealed manhole shaft can be used to make up the desired height with inlet and outlet connections cored or formed to suit your drainage requirements. An internal side wall can be incorporated in the end of the pipe if required, as well as double step or ladders to permit access.
An end entry manhole is classified as a junction within the scope of BS EN 1916:2002.
Available from 1200mm and above, smaller diameters can be manufactured upon request.